A 400cc go kart engine sits at the upper end of the single-cylinder engines used in recreational karts. In practice, the “400cc class” usually covers horizontal-shaft industrial engines from roughly 390cc to 420cc, along with some motorcycle and ATV engines of similar size in buggy-style builds. These engines offer far more torque than the common 212cc and 224cc units, which makes them popular for heavier two-seat karts, off-road builds and karts carrying adult riders. This guide explains what to expect from a 400cc engine, the main types, fitment and drivetrain needs, costs, how to choose one, maintenance and safety.
Part of our Go-Kart Engines & Drivetrain guide — explore the full guide →
What Is a 400cc Go Kart Engine?
The figure 400cc describes engine displacement: the combined volume swept by the piston. Most engines marketed for karts in this size are air-cooled, single-cylinder, four-stroke industrial engines originally designed for generators, pumps and other equipment. They are heavy and simple, with strong low-end torque and modest maximum RPM.
Manufacturer power ratings for this size typically fall somewhere in the low-to-mid teens of horsepower, though rating methods differ between brands, so compare figures carefully. The big gain over smaller engines is torque, which helps a heavier kart accelerate, climb and carry two people.
For an overview of engine sizes and types, start with our go-kart engine guide.
Types of 400cc-Class Engines
Horizontal-shaft industrial engines. The most common choice for karts. They bolt to a flat engine plate and drive the rear axle through a clutch or torque converter and chain. Brand examples include large-frame engines from Honda, Predator, Ducar and similar manufacturers, around 389cc to 420cc.
Vertical-shaft engines. Designed for mowers. They are not suited to typical kart drivetrains without significant adaptation.
Motorcycle and ATV engines. Some buggy and off-road builds use 400cc-range motorcycle or ATV engines with integrated gearboxes. These rev higher and can make more power but need more complex mounting, controls and cooling.
Engines with electric start. Many large industrial engines offer electric start options, which is helpful because pull-starting a high-compression 400cc engine takes effort.
400cc vs Neighboring Engine Sizes
| Engine Size | Typical Character | Best Suited To | Drivetrain Notes |
|---|---|---|---|
| 212cc to 224cc | Light, affordable, modest torque | Single-seat yard karts | Small clutches and converters widely available |
| 300cc class | More torque, moderate weight | Heavier single-seaters, light two-seaters | Larger clutch or converter recommended |
| 400cc class | Strong torque, heavy | Two-seaters, off-road and heavy builds | Heavy-duty clutch or larger torque converter |
| 500cc and up (V-twin) | High torque and power, heaviest | Large buggies and high-performance builds | Heavy-duty components throughout |
Compare the steps either side in our guides to the 300cc go-kart engine and 500cc go-kart engine.
Fitment and Drivetrain
Output shaft size. Many large horizontal-shaft engines in this class use a 1-inch output shaft, but shaft diameter and length vary by model. Confirm before ordering a clutch or torque converter.
Mounting. Bolt patterns differ between engines. Measure your kart’s engine plate and the engine’s mounting holes, and use an adapter plate if needed. The frame must be strong enough to carry the extra weight and torque.
Clutch or torque converter. A 400cc engine produces more torque than small kart clutches are designed to handle. Use a heavy-duty centrifugal clutch or a torque converter rated for the engine’s output. Our go-kart torque converter guide explains sizing.
Chain and sprockets. Larger engines often need #40 or #41 chain at minimum, and many builders prefer heavier chain for durability. Choose gearing to match your tire size and intended top speed.
Brakes and axle. More power and weight mean more stopping demand. Upgrade brakes and confirm the axle and bearings can handle the load.
Cost of a 400cc Go Kart Engine
Prices in the US vary by brand and features:
- Budget industrial engines: often roughly $350 to $600 new.
- Premium industrial engines: often $700 to $1,200 or more.
- Used engines: widely variable, often a fraction of new, depending on condition and hours.
Remember to budget for a suitable clutch or torque converter, mounting hardware, throttle linkage, chain, sprockets and possibly brake upgrades. These can add several hundred dollars to the project.
How to Choose a 400cc Engine
Check your frame first. A frame designed for a 212cc engine may not have the strength, mounting space or braking capacity for a 400cc unit.
Think about use. For a heavy two-seater or an off-road kart, torque and durability matter more than peak power. Builders wanting more power can also consider a twin-engine go-kart, which pairs two smaller engines.
Consider parts support. Engines with wide dealer networks or popular aftermarket support are easier to maintain.
Look at starting options. Electric start is worth considering for a large engine, especially if younger or lighter riders will use the kart.
Mind the governor. Industrial engines usually have governors that limit RPM. Removing or modifying a governor can lead to engine failure and is banned in many classes; follow the manufacturer’s guidance and any rules that apply.
Installing a 400cc Engine Step by Step
Every kart is different, but most installations follow the same sequence.
- Measure everything first. Record the engine plate size and slot spacing, the output shaft diameter and length, and the distance to the axle sprocket.
- Prepare the mount. Fit an adapter plate if the bolt pattern does not match, and make sure it is thick enough not to flex under load.
- Set the engine on the plate. Use slotted holes so the engine can slide to adjust chain tension. Leave bolts snug but not tight.
- Fit the clutch or torque converter. Install it with the correct key and retaining bolt, following its instructions.
- Align the sprockets. Lay a straightedge across the drive and axle sprockets and adjust until they line up exactly. Misalignment wears chains and sprockets fast and can throw a chain.
- Set chain tension. Allow a small amount of slack at the tightest point, then tighten the mounting bolts to the specified torque.
- Connect the throttle and kill switch. Confirm full throttle travel and a positive return to idle, and make sure the kill switch stops the engine.
- Add oil and test. Fill the crankcase to the specified level, start the engine with the rear wheels off the ground, and check for leaks, vibration and correct clutch engagement.
Follow the break-in procedure in the engine manual before running at full load. Recheck every fastener after the first hour of use.
Maintenance
Large industrial engines are generally reliable if maintained. Follow the owner’s manual for oil changes, which are often recommended after a short break-in period and then at regular hour intervals. Keep the air filter clean, especially for off-road use. Check the spark plug, valve clearances and fuel system as the manual describes. Store the engine with stabilized fuel or a drained carburetor if it will sit for long periods.
Check engine mounting bolts often, as vibration from a large single-cylinder engine can loosen fasteners. Inspect the clutch or torque converter belt for wear.
Safety Notes
A 400cc engine can push a kart to speeds and accelerations that small engines cannot. Make sure the kart’s brakes, steering, frame and tires are suitable. Fit a throttle return spring and confirm the throttle closes fully. Use appropriate safety gear and supervise younger drivers closely. Our guide to the Predator go-kart engine range covers safety and fitment tips that also apply to other brands.
Pros and Cons
A 400cc engine brings real strengths and some trade-offs.
Pros
- Strong torque for heavy and two-seat karts
- Simple and durable industrial design
- Electric start widely available
- Good choice for off-road and hill climbing
Cons
- Heavy compared with smaller engines
- Needs heavy-duty clutch or converter
- Frame and brakes may need upgrading
- Governed RPM limits top-end power
Frequently Asked Questions
How much horsepower does a 400cc go kart engine make?
How fast will a 400cc go kart go?
Can I put a 400cc engine on a 212cc kart frame?
What clutch do I need for a 400cc engine?
Is a 400cc engine good for a two-seat go kart?
Do 400cc engines need special fuel?
Final Thoughts
A 400cc go kart engine is a strong choice for heavy, two-seat or off-road karts where torque matters most. Check your frame, drivetrain and brakes before fitting one, and budget for the supporting parts. For more on karts built to carry two, see our two-seater go-kart guide.