Coleman Go Kart Guide: KT196, GK100, Parts and Buying

Two go-kart drivers on race track — Coleman Go Kart Guide

A Coleman go kart is a budget gas-powered off-road kart sold under the Coleman Powersports name, aimed mostly at backyard and trail use rather than racing. The two names you will see most often are the small 98cc GK100 and the 196cc KT196, which has a large aftermarket of belts, brake pads, chains and spindles. This guide sets out what the retail listings actually state about each model, flags where those listings contradict each other, explains the common KT196 parts and maintenance jobs, and walks through the choice between buying new and buying used.

What Is a Coleman Go Kart?

Coleman Powersports sells small gas karts, mini bikes and other off-road vehicles through big-box and online retailers. The karts are recreational machines: a steel-tube frame, a single-cylinder four-stroke engine, an automatic clutch or torque converter, and off-road tires. They are not racing karts and are not built to any sanctioning body’s rules.

The Coleman name is widely understood to be licensed for this product line rather than built by the camping-gear company itself, but none of the listings reviewed for this guide say who designs or manufactures the karts. Treat any claim about company history or factory origin with caution unless it comes directly from Coleman Powersports.

If you are still deciding between brands and formats, the best off-road go-karts roundup compares Coleman-type karts with alternatives across several price points.

Coleman Go Kart Models in the Listings

GK100. The GK100 listing describes a 98cc gas engine, a single seat, a steel-tube frame, pull start, an accessible kill switch, and an automatic centrifugal clutch. It states a maximum load of 150 lbs and calls the kart ideal for younger riders. Listed dimensions are 56.7 inches long, 32.3 inches wide and 19.3 inches high. The listing gives a 90-day manufacturer warranty. It does not state a top speed, a kart weight, a minimum age or a brake type.

KT196. The data available here contains no full KT196 retail listing, only aftermarket parts listings. Those consistently describe the KT196 as a 196cc, 6.5 hp off-road go kart that uses a 30 series torque converter, a 420 chain and a hydraulic brake master cylinder. Speed, weight, rider limits and warranty are not stated in that data, so check the owner’s manual or Coleman Powersports directly.

Other model codes. Parts listings also name the CK196, CK196-T, GK200 and BK200 in the 196cc group, and the CK100, SK100 and CK100-S in the 98cc to 100cc group. Some listings group the KT196 with the Hisun HS200GK, which suggests shared components, but none of them explain the relationship.

B100. For context, the B100 is a Coleman mini bike, not a kart. Its listing states a 105cc four-stroke OHV engine, 22 mph, a rear disc brake, a 150 lb maximum load and a weight of about 82 lbs.

The Best Off-Road Go-Karts: our top 3 picks

ProductBest forKey featuresPriceBuy
X-PRO Rover 125ccBest off-road kart overall
  • Hydraulic discs front and rear
  • 19-inch front, 18-inch rear tires
  • Roll cage, dual harnesses
$1,459.00as of Nov 18, 2026 7:53 am ESTBuy now →Check current price
Zyliathor 72V 3000WBest electric for rough terrain
  • Shaft drive with differential
  • Two off-road tire sets included
  • 500 lb load, front and rear shocks
$2,660.00as of Nov 18, 2026 10:50 am ESTBuy now →Check current price
Zyliathor 212cc ProBest gas power for trails
  • 212cc 7.5 HP four-stroke
  • AT19x7-8 tires, four shocks
  • Reverse and speed limiter
—Buy now →Check current price

Prices are Amazon’s listed prices as of the date and time shown and are subject to change; the price on Amazon at the time of purchase applies. As an Amazon Associate we earn from qualifying purchases.

See every pick compared: The Best Off-Road Go-Karts →

Coleman Models Compared

Model Type Engine (as stated) Max Load Top Speed Source
GK100 Single-seat kart 98cc, centrifugal clutch, pull start 150 lbs Not stated Retail listing
KT196 Off-road kart 196cc, 6.5 hp, 30 series torque converter Not stated Not stated Parts listings only
CK100 / SK100 Small kart 98cc to 100cc, 2.8 hp Not stated Not stated Brake pad fitment list
B100 Mini bike 105cc four-stroke OHV 150 lbs 22 mph Retail listing

Gaps in this table are real gaps in the source data, not omissions. When a spec matters to your decision, such as rider weight for a teenager, get it in writing from the seller or the manual before you buy.

KT196 Parts: What Wears and What Fits

The KT196 has one of the deeper aftermarket parts catalogs of any budget kart. Here is what the listings say about the parts owners replace most.

Drive belt. Belt listings describe an asymmetrical 30 series torque converter belt roughly 3/4 inch wide and 27 1/32 inches long, sold as a replacement for Comet 203589, Manco 5959 and Murray 12-8487. One listing adds that the drive and driven pulleys should sit between 6 5/8 and 6 11/16 inches apart on center. Note a small inconsistency: the same belts carry product-data lengths of about 27.1 to 27.3 inches, which likely reflects packaging measurements. Match the part number, not a tape measure reading alone. Our torque converter guide explains how the belt and pulleys work together.

Brake pads and master cylinder. Brake pad listings cover the KT196, CK196, GK200 and BK200, plus the 98cc CK100 family. Master cylinder kits for the KT196 come with a pair of pads and include a clear note: bleed the air out after fitting until a steady flow of new fluid appears. Follow the method in our brake bleeding walkthrough, because a spongy pedal on a hydraulic system is a safety problem, not a comfort issue.

Chain. Replacement chains are 420 pitch with 32 links. One seller warns that this means 16 inner and 16 outer links, and that some people call it a 16-link chain. Count your old chain the same way before ordering. Sealed O-ring versions are also sold.

Steering spindles. One spindle listing says newer knuckles use a larger ball joint, 26 mm with a 10 mm stud, versus an older 22 mm and 8 mm version, and that older karts need the swing arms drilled out to fit. That is a modification to a steering part, so only do it if you are confident, and check alignment afterwards.

Clutch pulleys. Watch the bore size. A driven pulley is listed for Coleman machines with a 16 mm shaft, while a 3/4 inch driver pulley listing specifically warns that it does not fit the 16 mm crankshaft Hisun engine on Coleman mini bikes. Measure your shaft before ordering.

Engine service parts. Listings cover a Huayi P19 carburetor for the KT196, a recoil pull starter, an 84 inch throttle cable, and an air filter kit that includes an F7TC spark plug. Confirm the plug against your manual rather than relying on a bundled part.

Routine Maintenance for a Coleman Go Kart

Small gas karts reward simple, regular care. Before each ride, check tire pressure, chain tension, brake feel, throttle return and that the kill switch stops the engine. After every few rides, clean or replace the foam air filter, especially after dusty trail use, and inspect the belt for glazing, cracks or a frayed edge.

Change the engine oil at the intervals given in the owner’s manual; the listings reviewed here do not state an oil type or interval. Lubricate the chain, check the brake fluid level on hydraulic models, and look over the steering ball joints for play. Store the kart with fresh or stabilized fuel. A general schedule is in our go-kart maintenance checklist.

Buying a Coleman Go Kart New vs Used

New. A new kart gives you the stated warranty, which is 90 days on the GK100 listing, a known service history and fresh consumables. Expect some assembly from the crate. Prices change often, so compare current retail offers rather than trusting older reviews. As a rough guide, entry-level 100cc-class gas karts generally sit in the low four figures or just under, and 196cc to 212cc off-road karts usually cost more.

Used. Used Coleman karts are common because many families outgrow them. Typical asking prices are well below new, often in the several-hundred-dollar range, but condition varies widely. The big advantage is that KT196 wear parts are cheap and easy to find, so a tired kart is often a manageable project.

Inspection checklist for a used kart:

  • Cold start: it should start within a few pulls and idle without surging.
  • Belt and pulleys: look for a glazed or cracked belt and grooved pulley faces.
  • Brakes: the pedal should be firm, with no fluid leaks at the master cylinder or caliper.
  • Steering: no clunks or play at the spindles and ball joints.
  • Frame: no cracked welds, bent tubes or heavy rust at the seat and engine mounts.
  • Chain and sprockets: no hooked teeth or stiff links.
  • Paperwork: the model code, so you can order the right parts.

Our used go-kart buying guide covers red flags and fair negotiation in more depth.

Pros and Cons

Pros

  • Simple recreational design that is easy to learn
  • Large aftermarket for KT196 belts, pads, chains and spindles
  • GK100 listing states a clear 150 lb load limit and a kill switch
  • Common on the used market at lower prices

Cons

  • Key specs such as top speed and kart weight are not stated in the listings
  • Short 90 day warranty on the GK100 listing
  • Parts fitment varies by shaft size and model code
  • Not designed for racing or paved high-speed use

Frequently Asked Questions

How fast is a Coleman go kart?
The listings reviewed here do not state a top speed for the GK100 or KT196. Only the B100 mini bike lists a speed, 22 mph. Check the owner’s manual or ask the seller, and remember that speed depends on rider weight, terrain and any governor setting.

What engine does the Coleman KT196 use?
Parts listings describe it as a 196cc, 6.5 hp engine. Aftermarket listings sell a Huayi P19 carburetor for it, but no full manufacturer spec sheet was available for this guide.

What belt fits a Coleman KT196?
Listings describe a 30 series asymmetrical torque converter belt about 3/4 inch wide and 27 1/32 inches long, sold as a replacement for Comet 203589 and Manco 5959. Match the part number to your existing belt.

What is the weight limit on the Coleman GK100?
The GK100 listing states a maximum load of 150 lbs and describes it as ideal for younger riders. It does not state a minimum or maximum age.

Is a used Coleman go kart worth buying?
Often yes, if the frame and engine are sound, because common wear parts are easy to source. Walk away from karts with cracked welds, a spongy brake that will not bleed firm, or an engine that smokes heavily.

Can a Coleman go kart be raced?
Not in sanctioned karting. These are recreational off-road karts. For organized racing you would need a kart that meets the rules of a body such as WKA or IKF.

Final Thoughts

A Coleman kart makes sense as an affordable first gas kart for a light rider or a family that wants a simple trail machine. Read every listing closely, because many headline specs are simply not stated, and lean on part numbers when you service a KT196. To weigh it against other options, see the best off-road go-karts for kids.

Related guides